Mag shooting more than once per trigger pull....HELP!!!!!!!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • magboySK
    Registered User
    • Nov 2000
    • 11
    #1

    Mag shooting more than once per trigger pull....HELP!!!!!!!

    My Mag recently has been shooting more than one ball per trigger pull. It will shoot when I pull the trigger back and sometimes also when I release the trigger or it will go full auto for about 8 balls and get bolt stick. I'm using a standard classic valve with a newer foamie bolt and Intelliframe that Jon from AGD installed last year at IAO. This is baffling me as I have changed everything in the gun and still have no luck..... Can anyone help me??????PLEASE!!!!!!!!!!!
    Last edited by magboySK; 05-07-2003, 12:40 AM.
    Tags: None
    • Paintchucker
      #2
      Trigger sear ???

      Sounds like maybe something is wrong with the trigger sear and it is not catching?

        Comment

        • magboySK
          Registered User
          • Nov 2000
          • 11
          #3
          up

            Comment

            • adam shannon
              Registered User
              • Oct 2002
              • 805
              #4
              its possible it may have something to do with wear on your on off assembly or on off pin. when i got my ule mag back from annoing before i set up the new x-valve for it i just popped in the already tuned x-valve from my e-mag...since the on off pin is shorter it would fire 5 shots per trigger pull then the trigger wouldnt reset. your pin may have gradually worn down over time slowly to the point that its now acting up. or then again i may be totally wrong.
              "whoever did that in the bathroom needs to start eating right and go see a doctor" - Tunaman, AOSC 2

              "back in the day of pumps this would have taken all @!#$ing afternoon" - Albinonewt , "Treatise On Welts"; chapter 2: The Electro Revolution

                Comment

                • cgrieves
                  #5
                  Check you have two o-rings in the on/off top, one inside the other, and that the smaller one fits snugly around the on/off pin. If in doubt, change both of them again for new ones..... it's possible you may have had dud ones in your spares kits.

                    Comment

                    • Lee
                      Team Trigger Happy
                      • Nov 2002
                      • 2395
                      #6
                      bolt spring or sere needs replacing.

                      Florida peeps...step up!!
                      My Feedback
                      "They do not preach that their God will rouse them a little before the nuts work loose."
                      -Rudyard Kipling: The Sons of Martha
                      "To understand the Automag, you have to think like an air molecule."
                      -Sparky Melber

                        Comment

                        • NykC
                          Registered User
                          • Apr 2003
                          • 9
                          #7
                          I'm assuming you've already tried oiling the on/off, and if nothing's working you can buy a whole new on/ff assembly from the online store for $15, and new sear assembly is only like $7 so it's not too big of a problem

                            Comment

                            • magboySK
                              Registered User
                              • Nov 2000
                              • 11
                              #8
                              Thanks everyone, I think I found most of the problem. My main rail is worn where the sear pivot rests and the sear moves up and down. I tried my stock rail and it worked much better. Just need a parts kit to replace eveything. Once again, thanks everyone.

                                Comment

                                Previous template Next
                                Working...