i was playing tonight and every now and then i would pull the trigger and the trigger would like get stuck or suctioned down and Co2 would just be rushing out of the barrel.i dont know what this problem could be?i have a classic by the way, is it becuse i am running off Co2?i dont have any clue.it drained my 16 oz. tank 1 and a half times in 3 hours though!!any help is greatly appriciated!!!!!!!!!!!!!!
-
-
It sounds like the o-rings inside your on/off assembly are either damaged or they're freezing up. Disassemble the on/off assembly and check the o-rings. Look for little nicks and dings on the rings themselves, in particular the tiny white teflon ones. Replace any damaged o-ring with rings from an AGD Automag parts kit.
If it's been a while since those o-rings have been replaced, you might want to go ahead and replace all the seals in the on/off whether they appear damaged or not. Since you would then have some parts left in the parts kit, it might be a good time to overhaul all the seals in your mag.
BJJB -
let me guess, standard co2 tank screwed into the bottomline, right?
sounds like a classic case of liquid co2 getting into the valve and frezzing the on/off o-rings and the pt o-ring. stop using co2 and it will go away.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
ok thank you very much!!!Comment
Comment