I know I may sound stupid but is there a Low Pressure version of the Flatline 68ci 3000psi tank....The one I have won't go over 500psi.....also is there any way to make it goto 700psi where I need it for my RT Thanks anyone.
-
-
If it won't go over 500, you need to check to make sure your gauge is working properly and if that's okay, check out the system by taking it apart and cleaning it and make sure everything is clean and oiled. You can take a look at my Flatline reg. maintenance thread in the Gun/Airsystem classic thread at the top of this forum. -
No the numbers themselves aren't any higher than 500.....I don't know if the guy before me installed a nother guage or if not.Comment
-
I would replace the output gauge with a new one that goes to 1200 PSI and then see if it works.
if it still wont go over 500 PSI, then do all the cleaning the other guy recommended and see it if works.
I suspect that this guy you bought it from replaced the stock spring pack with a 68 automag spring pack. those will allow a flatline to go under 500 PSI, but I bet it also limits how high it will set to.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
Comment