I just ordered an Rt Pro, so can someone please give me some tips about for when i get it.
-
-
number one tip......fully pull the trigger and let go. it is ALOT harder to short stroke an RT valve, but it can be done.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pages -
Make sure you only run HPA/Nitro through it.
Put a few drops of oil in the air line and gas her up. Fire several shots to work the oil through.
Remember- the velocity adjuster is on the back and if it shoots air out the back, your velocity is too high. (Pull the trigger to stop the flow of air & turn it counter-clockwise with a 1/8 allen key.)
remember- when AGD says "reactive trigger" it means that it kicks the trigger back to firing position REALLY fast. It's not the Tippmann RT that's damned near full auto.Comment
-
Will a Ricochet AK hopper work ok with the RT, i got the pwerfeed one.Comment
-
any hopper will work. some will work better than others, but any will work. if your RT pro has the x-valve, it will have the Lx bolt in it, so even a VL200 would work. no chops.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
Be sure to take off the barrel, to get the oil through. If not, it makes the barrel really oily, and very inacurate.Originally posted by Dayspring
Put a few drops of oil in the air line and gas her up. Fire several shots to work the oil through.Comment
-
Does the RT Pro come with an intelliframe? And is the stock barrel good, how long is it?Comment
Comment