How do you guys clean your marker and accessories?

[MikeCouves]

I was wondering what you guys use to keep your mag all polished and nice? I just use like paper towels and q-tips...

I was also wondering how you can polish your mag and stuff without using harmful chemicals or anything. Just like a method of doing it with something that's not very strong?

Mike

[kickass68mag]

paper towls, and elbow grease

on my mag i just get a roll of paper towls, i polish it up, and i am happy, to clean my acessories, i usuall like my pods i just put them in the sink, my mask lense i put in the dishwasher (top rack) on my chrome i get some chrome polish and a cheese cloth wrag and polish that up and beautiful.

[Thordic]

I use cotton tipped applicators. You can probably get them from a lab supply or medical supply place.

They are like a Q-tip, but only one end on a 6" wooden stick. They let you clean inside the body a little better if you have gunk in there.

I use them if I made a mess inside the body. Otherwise, I just use paper towels.

[Russ]

Everthing, except electronics and batteries, gets washed in the sink with hot soapy water. By using hot water, the water evaporates quickly. Q-Tips and an old toothbrush get into the nooks & cranies.

[slateman]

The elves clean my gun


But seriously, I use paper towls, Q-tips, and cloth diapers (never been used). If I chop a ball I take the valve out when I get home and run water throug the body and then dry it.

[Shaft]

I clean and oil mine much like Private Pyle in Full metal jacket.

It gets dismantled and everything washed under the sink.

[Muzikman]

Cloth diapers...hot water...qtips...but then again, none of my guns a pretty and none of them shine:)

[udtseal]

I go the carwash and hold my E-Mag out the moonroof of my car.

Honestly, i just use cloth diapers, terry cloth towels and the long medical q-tips like thordic mentioned. Oil the appropriate parts and away she goes in my Redz bag ready for more action....

[Drizit]

pull the valve out and stick a hose in the back of the gun, and run a straight shot through it a couple of times. the bolt and spring get cleaned with the hose and paper towel. anything else that needs it gets wiped down and or washed with the hose.

[MagNumPI]

This is what I do..

I strip it down and run hot hot water over the main body and trigger frame, paint just comes right off with hot water. Also if it is grimy i use some methal hydrate and q-tips/paper towels.. I don't soak it but as long as there are no Orings you should be ok.

[AlaskaMike]

I just take my dads air compresser and blow the paint and stuff outa the small spots, then I use paper towels for the rest of the gun. When the compresser isnt around Gadget68 and I use the scuba tank fill station:)

[Bartleby]

i bathe with it

[Dubstar112]

DO NOT PUT THEM IN THE DISHWASHER AS I DID!

i think i made my point, the dishwasher with out soap still took the annodising of my splash kit, just by the pure over boiling steam, it was ugly and i have been conteplating sending all my stuff out to get it all annoed to match, quite expensive.. a little over 300 dollars for the pattern

[xmetal2001]

if it was a good day(no chops, breaks) then i just use paper towels and wipe everything down. If there is some paint on the bolt and stuff then i will use q-tips or something like that. Damp-paper towel when i want things shiney

[MagNumPI]

Dubstar: Didn't you read the "Not Dishwasher Safe" Sticker on the box. LOL j/k That suck you have to get it redone was it every part?