>>>>>>>Need Advice<<<<<<<<

[Rexel16]

I have a minimag with a benchmark 2x frame. Now, should i get an Elcd, Retro valve, Elcd & Retrovalve, Intelliframe, or should i just keep the benchmark? Whats the best possible setup i can have for shooting fast?

Thanks

[MINIRETROMARK]

keep the benchmark and buy a retro. and for the elcd like the boo yaah it is not compatible with the retro, but in the other hand the hyperframe should be fine.

[Rexel16]

would a booyah or mako work well with the stock minimag valve?

[MINIRETROMARK]

yes with the stock valve it should be fine

[Rexel16]

hmmm...

Will I have a problem with shootdown with the stock valve and an elcd? Would the stock valve and elcd be better than a Retrovalve w/ Benchy or vice versa?

[MINIRETROMARK]

have you looked up the hyperframe, that elcd frame is compatible with the retro.

[MINIRETROMARK]

Rexel16

with the stock valve you usually suffer shootdowns if you go over 10 pbs

[Fritzy]

standard valve is fine...

My friend has a hyperframe and a standard AIR valve. Set at 13 bps he doesn't have any shootdown. In fact, one of the HALO videos shows a standard mag witha Hyperframe shooting 16 bps with no troubles. If you are looking to shoot fast without short-stroking an electronic frame is the way to go. However, a retrovalve will generally be more reliable and can shoot pretty quick itself.

If speed is your primary concern, get the electro-frame.