minimag with hyperframe problem..

[mini_marc_mag]

I was going to play paintball today but my gun was'nt working.I put a new battery in it but it still did'nt work. I shot my gun last weeek an it was working fine, so I don't know what to do. Can someone please tell me what I could do to make it work?

[cgrieves]

We really need more information before we can help you.....

Are you using the Centerflag on/off or the standard AGD on/off?
Is it level 10/level 7?
Have you lubed it?
What is the power seting on the Hyperframe?
Have you taken the grip off and checked the sear leg and solenoid are lined up properly?
Does the marker fire if you manually push the sear through the sear hole on the frame?

[mini_marc_mag]

well, yes the gun shots when I manualy push the sear up.no I don't have a level ten. I have a ans ventury bolt.my battery is at 9 in the service mode and I don't really know much about the sear. And I don't have the safety button anymore.

just tell me a few thing to try to do to make it work, because I am getting really mad I'm probably going to call center flag products today.

[cgrieves]

Try working through hitech's excellent hyperframe FAQ:

http://www.automags.org/forums/showthread.php?s=&threadid=79328

It's most likely going to be the on/off pin length (you still didn't say if you're using the Centerflag on/off pin whcih is important) or a solenoid position issue.

Calling Centerflag is probably the first thing you should do!