x valve leak?????

[ryal999]

ok i just got this mini mag vert feed w/ intelliframe and x valve...the guy i bought it from said he had it dialed in but i gased it up for the first time and it leaks down the barrel!!!???? someone please help so i can rip this marker!!!! thanks

[Dayspring]

You have to tune the level 10 system. There's a big instruction page of how to do that on the main AO page.

[ryal999]

thanks but

im not understanding still how to do that should i call that tech line they have??? im lost w/ valve stuff??? need help thanks

[Dayspring]

http://www.automags.org/resource/level10/index.shtml

This is all the instructions you'll need.

[ryal999]

the x valve came w/ a peice of paper that says if its leaking down the barrel the replace it w/ the next shorter spacer??!! are these extra parts in the little baggy spacers that came w/ x valve box???? please help thanks

[Dayspring]

Yes.

The carriers are denoted by the # of dots and rings on their sides.

A dot is a half size. A ring is a full size.

1 dot = .5
1 ring = 1.0
1 dot + 1 ring = 1.5
2 rings = 2.0
2 rings + 1 dot = 2.5

They go from 0.0 to 4.0

So if you're leaking go down a half size. If you're at a 1.5, go to a 1. If you're at a 1.0 go to a 1.5 etc...

[ryal999]

cool thanks man! i put a smaller spacer/carrier thing and works great!!! also found out the guy that owned it before me didnt have the two shims in either???!!! now its great! where do you oil the x valves at??? someone told me to put like 3 drops in my line running to the valve then shoot it a bit??? is that true??? thanks

[sneakyhacker420]

before and after every day of play, put about 4 drops of oil in the powertube and move the bolt up and down with your hand to spread the oil among the o-ring in the carrier, then put 2-3 drops of oil in the air intake closest the the valve, then gas up the gun, and take 40-50 clearing shots WITHOUT the barrel on so that the oil coats all the o-rings, and so that the barrel doesnt get slicked up and make the ball curve


theres also a link in my sig to the level 10 installation/tuning thread