Is it the LX or X-Valve or just me?

[J]

I got my x-valve a few weeks ago, started with a 1.5 then moved to a 1.0 carrier. Went and played and my bolt kept on sticking, so I took out one of the shims and it worked alright, only sticking about 3 times. So now I've switch to no shims with my 1.0 carrier and sometimes when I pull the trigger is just pushes the ball an inch ahead, much like a short stroked trigger. But it doesn't feel like I'm short stroking. Is it? Or is it something I need to fix with my level 10?

If it helps here's my gun:
Classic Automag
Dye 2x Frame
Crossfire 68 stubby
CP Barrel kit

[MinimagRockin']

You might want to check the length of your sear rod. I know when I put on my dye 2x frame the gun wouldn't even shoot because the rod was the wrong length for that frame. Make sure there is a little space between the trigger and the rod when the gun is aired up and you pull the trigger forward (the opposite way you normally would pull it) as far as it will go.

[J]

I got about an 8th of an inch space between the rod and trigger...