hi ,just can`t figured out what is happening with my x valve.it gas up but can`t fire also is keeping the pressure even after discharge the tank .any one run into this problem please let me know.
-
-
take it to the technical forum. and use the smallest spring -
Moving to tech.
The residual gas is a common thing with the LX. You'll need a slidecheck to vent that out. Proconnects are nice, too.
Describe your LX setup. What spring are you running? Did you turn up the velocity?Comment
-
It does sound like a level x problem. It sounds like it may be bolt stick? Have you oiled the the powertube o ring and put a few drops in the ASA? Check out http://www.automags.org/forums/showt...threadid=40904 and http://www.automags.org/forums/showt...threadid=43538 The first one has alot of good info and the second is a problems thread which you can find tons of answers in. I couldn't tell whether you were using a screw in tank or not. You mentioned that it's still keeping pressure after you discharge the tank. I use a Slide check to vent the nitro out w/ my Flatline.
Comment
-
re
thanks!!!Comment
-
frame
i think my problem is wrong intelliframe ,it`s not rt version.any one knows how to fix it?Comment
Comment