should i cut this...?

[litestab]

the feed tube, down so the elbow just hits the main body...

[ChucktheMAGician]

Sure, Why not? Make sure you put the screw on your elbow in the other way tho so it won't scratch your body.

[Powday]

Cut it and let us know how it goes and how you did it (anything special?)! :)

[litestab]

hey

well how should i cut it?

[ChucktheMAGician]

Get one of those knives off of TV that cuts thru bread, pipes, cans, and shoes! Or you could try a hacksaw!:)

[Cryer]

Originally posted by ChucktheMAGician
Get one of those knives off of TV that cuts thru bread, pipes, cans, and shoes!

I have one. Its great! I cut through my nightstand with it. It might take a while to hack off that stainless steel tube, though.

[spydervenom]

if you can find someone local w/ a mill you can get it done in 10seconds probably for free

[rehme]

i dont know if you should be cause on your hopper if you cut it 2 paintballs whould be positioned so your hopper would keep spinding

but it is yours and you can do what you want

[WickeDKlowN]

I cut this with a Dremel, Hack Saw, and a File. A Bench Grinder might be faster than the file, but it creates ALOT more Dremel work.

[classicmagplayer]

Or you could just use a pipe cutter. I dont know the exact name but it looks like a clamp, you tighten it down and rotate it around the pipe. Do it a couple times and it makes a nice clean, stright cut. Then all you have to do is take some sandpaper and sand the sharp edge off. Thats how I did my standard feed body, and it works great.

[litestab]

thanks for the help guys, i do have a dremel actually.

[Benfica4ever]

I say cut it, but what kind of body rail id that on your mag?

[muirtach]

Yeah we've all been trying to figure out that rail for a while. I want one just like it.

[litestab]

re: my rail

yea i had alot of offers for it, upwards of 70.00... insane really..

[automan39]

i did that to mine and its awsome