Automag lock up
Played at Skirmish yesterday, in the Pocono Mt's, and I experienced , with both the guns I have, what I will call "lock up". The guns would be performing fine and would just stop. After breaking it down there seemed to be no apparent problem. After reassembling the gun it worked fine. It happened to each gun once during the day. Any suggestions or explanations? 2 68 Classics 1 with power feed 1 standard. Both have the LvL 10 bolts and both are operated on HPA.
-
-
Oil is your friend. Especially with level 10. -
I had what sounds like the same problem. I would get a decent string or two out, then nothing. Pull the trigger, nothing would happen. Take it apart, put it back together again and get a string or two then nothing if the gun sat for longer than 30 seconds. As it turns out, there was too much friction between the white o-ring (in the carrier) and the bolt. Put a drop of lube on the white o-ring, another on the bolt tip and bingo. Back to smooth shooting.
CharlesComment
Comment