i was cleaning my automag rt pro, and i decided to twist out the pin behind the trigger to allow of more reactivity. the gun was able to fire rapidly at about 16 bps (random guess), when it would fire about 4-5 before that. the trigger would fire itself. the problem with it was that was air leaked out the barrel... i then put the pin to were the trigger had been before and found that air still leaked out the end of the barrel. when i would pull the trigger it would cut of the flow of air out the barrel, but ouldnt always fire. i was suggested to put oil thru the gun, and that helped somwhat, but i am still having leaking problems out the barrel. i thought that i could possible be broken seals inside the valve, or have something to do with the level 10 that i have installed.. i was wondering if anyone had adjusted the pin on their rt trigger to allow for more reactivity, and if they had how they had went about it.. i had found that i could hit the "sweet spot" with eaze when the pin was pushed into the trigger, but as i brought it back it became more and more difficult to find it, also the whole leaking thing became a big problem.
thanks for any help,
jarod
thanks for any help,
jarod
Comment