I'm probably going to get my x-valve tomorrow and I was just wondering if all I have to do is slide it in my gun and im ready to try it out. Or do I have to change the sear,sear pin, or anything else?
-
Hello. -
u have to change ur sear and maybe do a little level 10 mod but just change the sear then try it out and then tune ur level 10 if needed -
k, will that be easy?(Dunno never messed w/ my sear.
And what do u do to adjust LX?Hello.Comment
-
The sear comes out when you take your body off. Remove the front screw on your grip and the grip should drop and the body should lift up (This is of course after you remove the valve) Then the sear just lifts up remove the rod holding it in place and it'll drop out of the bottom. Then do in reverse to put the new sear in.
Hope this helps.....how i took out my searComment
-
alright that makes sense, i know just what u mean. Thanx for the help, I think it'll be here tomorrow or this after noon maybe.Hello.Comment
-
Tear your valve down to the nuts and oil it. Lube the velocity adjuster threads good or you could strip them out. The level 10 usualy is not setup right so study up on that.
Comment
-
How do you go about doing that?Originally posted by TAW
Tear your valve down to the nuts and oil it. Lube the velocity adjuster threads good or you could strip them out. The level 10 usualy is not setup right so study up on that.Dynaflow for sale, PM ME!
My AO Feedback Here
My eBay Feedback Here[/font]Comment
-
how will i be able to nkow if the LX isnt adjusted right and how do i adjust it?Hello.Comment
-
ur bolt should slide onto ur powertube with little resistence and if leaking down barrel u too have change it but call up adg and they ll tell u how to do it though
or go to airgun.com for helpComment
-
ok in oiling its not going to have any oiling from the factory right. So when I get it before I try it out I should take it all apart and oil every part there is to oil or can i just put oil in the tank cradle and just let the oil get through the valve from there?
The X-Valve will deffinetly be here when I get home from school tomorrow!!!!!Hello.Comment
Comment