Hyperframe on/off pin !! Need help!!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dreamland
    Registered User
    • Apr 2003
    • 14
    #1

    Hyperframe on/off pin !! Need help!!

    Hallo, I have a Hyperframe and a Boo Yaah frame for a mag. Both are comming without the specieal on/off pin.
    What is the different between the stock on/off pin and the one from Centerflag?? Is it possible to modify the stock on of pin that it works with the E-frames? Is the Centerflag Hyperframe on/off pin the only one that works??
    Can any body post some pics from this on/off???
    many thanks for help

    Michael from germany
    Tags: None
    • Snertz
      H O O N
      • Mar 2002
      • 926
      #2
      Pin!

      Well, the pin the the hyperframe is spose to come with is a bit differently shaped than that of the standard pin from a 68 classic valve. It more closely resembles that of an RT on/off, so I guess your best bet would be to go and get the on/off assembly from a RT valve, and put that on the classic valve.

        Comment

        • Dayspring
          aka- The Day Wang

          • May 2001
          • 9664
          #3
          The centerflag on/off pins are a different length than ones that AGD makes.

          And no, you can't modify them to make it work. Shave too much and it won't fire correctly. Shave too little, the gun may not fire.

          You MUST call Centerflag and get the on/off they provide. Anything else and you risk the gun working improperly or not at all.

          (Keep in mind that these things are measured down to THOUSANDTHS of an inch. That's TIGHT tolerances.)

            Comment

            • Tim Taylor
              More Power
              • Feb 2003
              • 177
              #4
              Dayspring is correct. It is easier and more reliable to just buy the on/off from Centerflag. I think the whole thing will set you back about $20 but it's the only way it's gonna fire with a Classic valve.

              Your other option is to send the gun and trigger frame to Centerflag and let them get it to work for you.

                Comment

                • Dreamland
                  Registered User
                  • Apr 2003
                  • 14
                  #5
                  Need more info!

                  First many thanks guys, if i get the centerflag on/off what is it, what I get?? Only the on/off pin, the on/off top or the on/off base?? Or the complete on/off valve ??

                    Comment

                    • Tim Taylor
                      More Power
                      • Feb 2003
                      • 177
                      #6
                      Get the pin, bottom and o-ring for the bottom. Also, you might want to get the inner urethane o-ring that is above the on/off top (it replaces the teflon o-ring). Make sure you put plenty of lube in the on/off assy. The power setting for the solenoid shouldn't need to be any higher than 6 for it to work.

                      Good Luck

                        Comment

                        Previous template Next
                        Working...