PF 68 Automag Questions

[PFNitroAutomag]

Hi everyone,
I just joined AO and i need some help. I recently bought a 68 powerfeed automag and i need some opinions on what to put on it to make a it rock . i also need to know some of the problems it has. i have the following on it.

88ci 4500psi PMI Nitrogen tank
Freak All American barrel.
air setup

I was thinking about buying the intelliframe and lvl 10 upgrade but i dont know how much they will improve the gun. so if you guys could help me. Thanks everyone

[Dayspring]

Well, you're most of the way there really.

The intelliframe will help up your ROF b/c of the "snappiness" of the trigger. Plus, it takes Dye stickies, which is a definite sexiness plus. Add to that the ability to wire it to your hopper to feed every trigger pull makes for one REALLY cool package.

The Level 10 I think should be a "must have" item for all mags. I don't care if you've never chopped before or not. It drastically reduces recoil & will almost guarantee a chopless marker. (It WILL happen if not properly set up and on the odd chance now and then.)

The only couple things I would look into would be the ULE body/slug body. They are cocker threaded aluminum bodies for the mag with centerfeed necks. Next, would be the X-Valve. It is the aluminum ReTro valve and it comes stock with the Level 10 kit. (I'd wait on the level 10 and x-valve until the Ultra Light Trigger comes out. Rumor has it that it will come stock on the X-Valve. Makes the trigger 66% lighter.)