Trigger Pull

[zubolt]

I wanted to know if there was any way to shorten the trigger pull on my minimag? I know you can do it to other guns.

[Derman2k]

You can buy an Intelliframe but thats about it...

[zubolt]

What about adjusting the pin that the trigger pulls? Will this shorten the trigger pull?

[Derman2k]

NOooo....never do that. It will just mess everything up

[zubolt]

thanks for the help.

[Clockwork_Orange]

Derman2k, You think adjusting the pin a little will mess up the mags (retro valve) performance

Upgrade your grey matter 'cause 1 day it may matter!!! 

[f3rr3+]

he doesnt think he knows it... that is a great way to screw up a good gun... that simple

[sneakyhacker420]

Originally posted by Clockwork_Orange
Derman2k, You think adjusting the pin a little will mess up the mags (retro valve) performance

its a proven fact that you shouldnt mess with the trigger rod


picture it as a teeter-totter and if you change the length of the rod, you're changing the pivot point of the teeter-totter (the sear in this case)]

^
said by Tom Kaye, owner of AGD

[Clockwork_Orange]

I've never adjusted the pin on my mag when I used the classic valve, but when I bought the retro valve I moved up the pin just a litte (half a twist or a full twist) and have been playing with it for about three and a half years without any problems and that's the only marker I own... I don't know; somebody tell me what I did wrong? 'cause I don't see!

[sneakyhacker420]

you may not see, but you are slowly ruining the sear, bolt, and the internal workings of the valve because of a small throw-off in timing of operations

[Clockwork_Orange]

you may not see, but you are slowly ruining the sear, bolt, and the internal workings of the valve because of s small throw-off in timing of operations

Thanks for letting me know sneakyhacker420, That's all I needed to hear... :)

[sneakyhacker420]

no problem, always happy to help others... when i'm in a good mood


(i have a madd headache right now but am still in a very good mood for some odd reason... you got lucky)

[Clockwork_Orange]

[jaylock33]

Just to make sure you guys are talking about the same thing because it sounds like one of you are talking about the on/off pin and another is talking about the trigger rod. I know playing with the on/off is a big NO, but I was under the impression that the trigger rod was designed to be set up so that a it was only a playing cards with away from the trigger, at least that how mine came.

[sneakyhacker420]

changing the on/off pin length is fine, but the shorter it is, the more reactive it gets

i currently have a .745 pin (stock is .750), and it is reactive as hell, but no ref is able to find the sweetspot


oh god i love my mag... its just deadly fast in the right hands... my hands


i just hate the level 10 though... and i need a new mainbody... i smell FSE-LX sluggo