IntelliFrame to revolution 9v

[souler]

[ugabiged88]

I think that it would be the same as hooking up your intelliframe to a 12v, but I am not 100% sure.

[souler]

[Dayspring]

Do what I did. Buy the Xboard upgrade. It fits right in, you just take out the plastic block that sits in the battery compartment. Keep the shells. They're relatively cheap- something like $15.

[Cryer]

I'ts the same process. On my 12v, I didn't solder anything. you splice into one of the wires coming from the eye, and take the other wire to the battery terminal. You don't have to mess with the board itself.
I don't remember exactly which wire to splice, but in the technical manual section of the store, there are step-by-step instructions.