Better warp+loader adapter?

[Duke Henry]

Hello all, I am sitting here looking at my warp and halo setup and was thinking that instead of having a bent warp hose that forces me to twist my halo inwards (since I had to modify my warp bracket, and made it come out at 90 degrees).

Anyway, since the warp sits basically perpendicular to the gun, both the in and out of the warp are right in front of each other. So, for my halo to work with the warp hose, I have to turn the halo in. (I COULD use an Evo 2, but I have tried and don't like the Evo 2).

Now, I was looking at my warp vertical feed adapter that I never used and I think that if I used two of these (one into the warp and the other into the next 90 degree), I could have a viable solution.

However, I wanted to know if there are any other premade brackets that would do the job in a better way.

Ideas?

[sneakyhacker420]

PTP makes a bracket with many more options than the stock one

https://www.proteamdirect.com

also, what gun are you running the warp on currently?

[Duke Henry]

I just measured my included vertical adapter and it is just a hair too tall, it interferes with the halo.

The gun is an RTP and I want to hook the warp into the powerfeed (or if the gun had a warp body, same thing), and the Proteam stuff is something I don't know would work. I would still have to put 2 together, but I don't know how their ID and OD works, since I don't have one here...

[Duke Henry]

I can't believe I forgot to post the pics I took of the gun.

Anyway, here they are:

[David9862]

This might be a dumb question but isn't the halo a force feed hopper? And putting a halo on the warp redundant?

[Dayspring]

The Halo being force fed allows you to stay in "warp position" for an extended period of time before having to tip the hopper up and refill the stack.

[David9862]

Thanks! I knew it was a dumb question

[ugabiged88]

Having a Warp and Halo would be extremely heavy!

[Dayspring]

Sissy.

Go to the gym.

Actually, it's not too bad. I had it on my Emag and will do it again. My Xmag, though, I run vert mostly.

Originally posted by ugabiged88
Having a Warp and Halo would be extremely heavy!

[Star_Base_CGI]

Originally posted by Dayspring
The Halo being force fed allows you to stay in "warp position" for an extended period of time before having to tip the hopper up and refill the stack.

The warp feed can load 6 shots as a burst.

After that you will outshoot it.

The Halo and other feeders cant force feed balls. SO you could have a ball feed halfway and break. Theoretically.

The warp is also designed to reduce hopper hits.

So no you have to have it. LOL. Mine is so cool I love it.

[mh53eplt]

my halo/warp makes my emag evil

[Duke Henry]

anyway

You guys are silly, so I will have to put this back on topic.

Here is what I came up with:

[Duke Henry]

Another...

[Duke Henry]

The only prob I noticed is that I was getting some ball jams in the adapters.

Now, I didn't have everything tightened down, and my hose was not in like it is now, so hopefully that will fix the problem.

I don't know if I have the new plugs or not, but by looking at them they don't appear to be the old style.

What's that, take a picture? O.K.

[Star_Base_CGI]

You can try moving your warpfeed at an Angle and you want need those plugs. (Maybe) I think there just good for verticle feeds. SOme people melt pocket in their loaders for the hose altough Id be afraid but...

That brings us back to you wanting a perpedicular mount setup.