building my own mag, need help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • chris99506
    i'm a Bare assed monkey
    • Jun 2002
    • 136
    #1

    building my own mag, need help

    is this everything you would need to build a mag? i think i have all of the basic parts, i already have a barrel and air set up but i want to make sure that this is everything i need to build my own gun.

    - ULE mainbody
    - RT pro rail assembly
    - intelli frame
    - X-valve(comes with sear)

    please let me know if i am missing anything, any suggestions will be greatly appreciated.
    -=MARKER SETUP=-
    - 03 Angel Ir3 fly
    - 8 inch J&J edge barrel
    - 68ci 3k nitroduck
    - q-loader<--hands down, the best loader made.
    - do i need anything else?
    Tags: None
    • xen_100
      super-uber spyder tech
      • Oct 2002
      • 1203
      #2
      you dont have to use the RTP rail. you can use any rail you like. if you do use the RTP rail you will need to replace the on/off pin in the x-valve. it ships with .750" and the RTP rail requires .765".

      you will also need the fieldstrip screw and the frame rail screw. you can get these at the AGD store.

      "super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
      Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
      Xen's paintball pages

        Comment

        • WickeDKlowN
          Registered User
          • Jun 2001
          • 3098
          #3
          just the screws and stuff. And I'm not sure if th X-Valve comes with a sear pin, so you mnight need one of those.
          Classic RT - RT02667
          Blade IntelliFrame
          Dye Ultralight

          http://TheHybrid.net/

            Comment

            • ignatz
              Black Flag
              • Dec 2002
              • 505
              #4
              My X-Valve did not come with a sear pin, so you'll need one of those. You will also need a rail bushing which you can also buy from the AGD store.
              My feedback.

                Comment

                • xen_100
                  super-uber spyder tech
                  • Oct 2002
                  • 1203
                  #5
                  that depends on where he buys the rail. if he buys stock AGD rails, they come with the twistlock and bushing installed (of course he wont need the twistlock with a ULE body.) benchmark rails do as well. the omega rails do not, so you would need a bushing for those.(if you can find one)

                  "super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
                  Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
                  Xen's paintball pages

                    Comment

                    • Quackman71
                      Do the swimmer slap.
                      • Jan 2003
                      • 207
                      #6
                      I would suggest a foregrip, you also need the air hoses and misc. connetors for them. Slide check or pro-connect as well. Sill need to get myslef a slide check, last time I took my gun apart the on/off shot out and flew across my room=Bad
                      JUST PLAY.Don't Gripe

                        Comment

                        Previous template Next
                        Working...