Building my own mag...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Woozer
    Sold soul to CounterStrike
    • Jan 2003
    • 26
    #1

    Building my own mag...

    Hey, My friend has an awesome mag, and ever since I used it, I've wanted a sweet mag. I havent been able to find the right mag for me, so I've deceieded to build my own. I have the major parts chosen. I plan on purchaseing a ULE body, X-valve, and a intellaframe. Are these the only major parts i need other then air fittings and a forgrip?I already have a nice nitro tank to use with it. Is there any other parts that I'll need? And my freind hopefully will be able to put it together. Any input would be cool. Thanks.

    -Joe
    Setup: Red Gloss Nasty Impulse-Vision-Full Freak-SS Freak Back-68/4500 Max-Flo-Red Halo B
    Tags: None
    • Bulldog
      Registered User
      • Jun 2001
      • 1374
      #2
      A rail, front screw and field strip screw.

        Comment

        • Woozer
          Sold soul to CounterStrike
          • Jan 2003
          • 26
          #3
          okay, thanks
          Setup: Red Gloss Nasty Impulse-Vision-Full Freak-SS Freak Back-68/4500 Max-Flo-Red Halo B

            Comment

            • Dayspring
              aka- The Day Wang

              • May 2001
              • 9664
              #4
              rail bushing & misc. screws.

                Comment

                • Woozer
                  Sold soul to CounterStrike
                  • Jan 2003
                  • 26
                  #5
                  are there any parts that i could use that would be better then what i already have?
                  Setup: Red Gloss Nasty Impulse-Vision-Full Freak-SS Freak Back-68/4500 Max-Flo-Red Halo B

                    Comment

                    • Drizit
                      Take me to your Lizzard
                      • May 2001
                      • 943
                      #6
                      not realy, unless you want an emag setup. and the rail usualy comes with a bushing and the body with the front screw if you buy it new. you will also need a sear and sear pin. (the sear used to come with the retro but i don't know about the x-valve.) the sear pin you have to order. the only screws you should need to special order are the field strip screw and bottem line screws. if you want a forgrip you will need the virtical air adaptor. and posibly a kap forgrip extender if your forgrip is too fat for the i-frame.
                      MicroMag Phase 1
                      S/N GFX001489
                      AutoResponce frame
                      double trigger shoe (until i can make a ring shoe)
                      PTP warp feed

                      And the Biggest, Heaviest, 19+bps'ist Tippmann you have ever seen.

                      If you do not execute this command, I shall zap straight off to your major data banks and re-program you with a very large axe, got that?



                      There must have been a time
                      when we could have said no.

                        Comment

                        • Woozer
                          Sold soul to CounterStrike
                          • Jan 2003
                          • 26
                          #7
                          alright, thanks, how much would an emag setup cost?
                          Setup: Red Gloss Nasty Impulse-Vision-Full Freak-SS Freak Back-68/4500 Max-Flo-Red Halo B

                            Comment

                            • Drizit
                              Take me to your Lizzard
                              • May 2001
                              • 943
                              #8
                              you will need most of the parts on this page.

                              http://store.airgun.com/acb/showprod.cfm?&DID=17&CATID=6&ObjectGroup_ID=23


                              or just buy an emag and drop a ule body on it. (or even ask nicely and they may make one with the ule for you.)
                              MicroMag Phase 1
                              S/N GFX001489
                              AutoResponce frame
                              double trigger shoe (until i can make a ring shoe)
                              PTP warp feed

                              And the Biggest, Heaviest, 19+bps'ist Tippmann you have ever seen.

                              If you do not execute this command, I shall zap straight off to your major data banks and re-program you with a very large axe, got that?



                              There must have been a time
                              when we could have said no.

                                Comment

                                Previous template Next
                                Working...