Your Minimag Setup

[Cryer]

Originally posted by Automagger44
should i get the intelliframe from pbgear or from here??(automags online store)

If you get the Intelliframe from pbgear, its $6 cheaper plus free shipping.

Also, I forgot: Cphillip and Tunaman are selling RTPro's (that come with level 10, xvalve, and intelliframe) and including a free warp feed all month long in June. Thats the best deal you'll find anywhere...If you get an RTPro, You dont need to upgrade...check it out

[Carnage]

Yea.. Just get Tunaman/Cphil's deal.. Its all top of the line stuff..

[Automagger44]

im still confusd on the minimag thing...ok, i have a spoon cradle with a asa adapter, how would i run a macroline from the gun to the asa, if the minimag is a vert asa??

[Cryer]

Even though the marker comes with a vert ASA, the air still has to get to the valve. If you did run air through the vert ASA, you'd have 2 hoses: 1 from your tank to the foregrip, and one from the vert ASA to the valve.
Like this: (My Automag. Old pic)



You can also just run the line from your drop to the valve.
Like this: (Dave's Automag)



See? he has a vert ASA and a gas-thru foregrip, but he doesn't run the air thru the grip...

[Automagger44]

so i can buy a minimag, and just get a foregrip, and connect the valve to my drop??in that case, what do u think i should get, the tko automag kit, or a minimag and foregrip+extras??

[Automagger44]

and also, if i got the minimag, would i need to get steel braided hoses??

[Cryer]

Originally posted by Automagger44
so i can buy a minimag, and just get a foregrip, and connect the valve to my drop??in that case, what do u think i should get, the tko automag kit, or a minimag and foregrip+extras??

Of those 2, get the TKO package. Same marker, but it will come with all the basics: a barrel, foregrip, and hoses. The only difference is that the Minimag has a longer body.

First get the TKO Mag for $280.
Then get the Level 10 for $69
Then, a revvie for $50
Then, an Intelliframe for $110
and Finally a redz pack & belt for $62

That totals around $570.

Later on, when you have more money to throw away, get an x-valve, ULE body and a cocker barrel kit (multi-bore like the PIPE)

[Cryer]

Originally posted by Automagger44
and also, if i got the minimag, would i need to get steel braided hoses??

It comes with one. you would need a foregrip, a bottomline ASA, and another hose.

[Automagger44]

ok thx m8, i havnt decided if im geitting a revvy or a rico.

[Cryer]

My friend got a rico, he says he doen's like it. it feels 'toyish', so he bought an Evo. I think eventually (especially if you get the X-valve later on) you need to get an Evo2, but for now, get a revvie. They are $50, and in my opinion, work better than the ricochets that cost $15-$20 more.

[Automagger44]

k thx...could you plz answer my pm...ty..

[Cryer]

Originally posted by Automagger44
k thx...could you plz answer my pm...ty..

already did...

[Sputnik]

I'd recommend scoping out the for sale section here at AO. Find someone respectable with good feedback selling most of what you want (granted, you probably won't find someone selling EXACTLY what you want) and get the other pieces/parts from other folks here. You'll come out ahead.

A well taken care of used mag will perform exactly like a new one. They'z durable!

[SIGSays]

hey what is that on the hose?? like the rubber stuff?? can someone email me [email protected] and tell me what is is and where i can get it?

[Cryer]

Originally posted by SIGSays
hey what is that on the hose?? like the rubber stuff?? can someone email me [email protected] and tell me what is is and where i can get it?

Usually people will use heat shrink tubing (available at Radio Shack). Dave used somthing else, I forgot, but you can PM him and ask... It's used to prevent the hose from scratching the finish on the bodies