This is the 5th time i've used my brand new RT Pro, and for a while (about 1000 rounds a paint) it was working great, than after a game I hear it leaking. I check the tank and the O-ring on it, and it's fine. Than I notice that the leak is coming from down the barrel and the power feed. Lucky there was this kid there who knew a lot about mags. He took it apart,and saw that the spring on the bolt was bent, so that is what he thought was wrong with it. The bolt was factory installed and came with the X-valve. The kit came with two extra springs another silver one that is larger than the silver one that was already on the bolt, and one gold spring that was shorter than the one that was installed on it. Any input would be greatly apprieated b/c i'm going to skirmish this upcoming weekend, and my friend has been having the same prob.
-
-
there's three different lengths of springs... for three different amounts of pressure on the ball. Larger spring being the least amount on the ball.
The middle spring has been cut from the large spring... so just a shorter larger spring. if i remember correctly, there has been some rare problems with the middle springs.
My suggestion would be to just go with the large or small spring and stay away from the middle one... you'll be just fine -
But is it leaking b/c of the spring? I'm gunna test it out tomorrow so, will see what happens.Comment
-
If it's a newly installed then your level 10 oring is breaking in. YOu have to take the current carrier out, and go 1/2 size smaller. Use the SAME oring.Comment
-
How do I know if 1/2 size smaller? I have 9 carriers that came with the LvL 10 including the one that was already in there.If it's a newly installed then your level 10 oring is breaking in. YOu have to take the current carrier out, and go 1/2 size smaller. Use the SAME oring.Comment
-
A dot means a half size.
A line means a full size.
(Look at the carrier on it's side)
So 1 dot/1 line is a 1.5.
2 lines/1 dot is a 2.5.
Make sense?Comment
Comment