Mad scientist

[SaS]

first of all, this isn't a question so i'll remove it if anyone has a problem with this here... just let me know or just delete it... no hard feelings

4pics from my intellifeed Ricochet 2k project

My sensor damaged and wouldn't complete the circuit so i decided to do this instead of getting a new sensor...

Radioshack had the roller switch but not the connection that the rico had already set...... so i just cut off the sensor, and stripped the wires.

I used a phone jack wich i cut down to fit in the space under the agitator "motor." i also cut a whole in the bottom of the 2 shells to snugly fit the phone jack

pic 3 and 4:
i stripped the phone cord and connected it to the roller switch... and then mounted the switch using screws and bolts in the frame.... notched a hole in my grip and screwed everything back up
all done and works great.... but only if i had a black phone jack and cord to go with my setup... oh well, i can still put in new stuff later if i want to

i got a motion blur in pic 4

and yes i'll delete this if need be... just let me know

[SaS]

2

[SaS]

3

[SaS]

4... last one

[no_doz]

if u havent gone to college yet u are set for like MIT or sum <B>*POOF*</B>, i would have never thought of that, thats so clever <B>*POOF*</B> man, pardon my french lol

<B>*Warning: No Cussing*</B> -Miscue

[JAM]

nice work, I'll keep in mind if my rico sensor ever dies, looks like fun.

[SaS]

thanks no_doz and jam, it's always nice to hear compliments

ever look at your tab sensor thing? there's a goldish strip, sort of in a "C" shape going from the plastic and to the black pressure sensor... you can sort of see it in the first pic

part of this paintish stuff wore off from hitting part of the shell when the tab would return after being pushed down by a paintball..... this was the cause of my sensor dying

just if anyone was curious