What can i get ot improve my valve?

[no_doz]

other than the LX, what can i possibly get to have my valve recharge faster than it currently does, its a stock 4 star minimag classic, i want any possible way to make it recharge faster. anyone?

[Dayspring]

ReTro/Xvalve. That's really about it.

[nuclear zombie]

the question is not what can you do to make it recharge faster , it is what is causing it to shootdown? According to AGD the stock valve is made to handle up to 16 bps .

The manual is located here :

http://www.airgun.com/Images/automan.pdf

I suggest you read it, especially the throuble-shooting part regarding shootdown .

And on another note , posting the same topic 4 times with a different name everytime is very annoying , if I were a mod I would be very close to suspending you right now ....

[athomas]

Yes, the standard AIR valve does recharge fast enough. Its not quite as crisp or fast as the retro valve but if you do a complete trigger release on each trigger pull you will have no shootdown.

[no_doz]

well first off, you arent a mod, second of all, i didnt post "the same topic 4 times with a different name " this one is totally different from the others, 1 was directed at army asking if it was a good/bad idea to get hose parts, the other was asking all of you, and this one is asking a totally dif, question, since all those parts "suck" i am asking is there anything that would improve the performance of my valve other than the lx. by the way, count em up, 3, not 4, and i tried to delete the army one, but miscue already closed it.

[Dayspring]

What kind of performance are you looking for? The only upgrade to the Classic Valve is a ReTro/Xvalve. That's it. None of the other mods actually increase performance/efficiency/recharge rate. The level 10 is and will be the only positive valve accessory.

Deal with it.

And yes- you are posting the same topic in multiple threads. Knock it off. (No I'm not a mod. And it doesn't matter that I'm not.)

[QUINCYMASSGUY]

upgrades

Here are the bottom-line best upgrades and price ranges for what you want to spend:

$80-100: Level 10 kit, I have a real strong suspicion you should get it installed by someone or just really really REALLY take your time doing it and be careful cause I think it'll be tricky for you. It was tough for me the first time and almost lost a neccesary part.

$100-175: Lvl 10 and 68/3000 Nitro Tank. Needed if you ever go to the RT or X Valves. I'll sell my steel 68/3000 crossfire for $60 if interested, warrantied through january and never needs to be hydroed because it's steel.

$225: If you got nitro, and going to spend a fair amount of money, get the XValve because you get the essential Lvl 10 and a valve that never has shootdown and the benefits of reactive trigger action. Just go with the valve trade-in.

And I'm being nice giving you this detail. Dayspring is right and is respected around here. Stop opening all these stupid multiple threads when you can address it in one concise thread. I looked, you did open multiple identical links, we're not idiots. If you want the better resources to respond, respect them and the site. If you want newbs giving you bad advice, keep disrespecting us and the site like you have been. Don't say I didn't warn you.

[xen_100]

Re: upgrades

Originally posted by QUINCYMASSGUY
..........I'll sell my steel 68/3000 crossfire for $60 if interested, warrantied through january and never needs to be hydroed because it's steel.

that is absolutely wrong. ALL high pressure vessles that are over 2 inches in diameter have to be hydro'd.

aluminum and steel are every 5 years, fiber wrapped tanks are generally 3 years, but there are some 5 years tanks now too. if it is still under warrenty I assume it is less than 5 years old, but it does have to be hydro'd.