Odd problem

[chadthedude2]

ok after messing with the trigger rod length, trying to get it right, my gun has the same problem. i noticed that when i pull the trigger all the way in, then all the way out it fires twice. once for the pull, and once for the return. also, even when my saftey is on, i barely tap the trigger, it goes off, and if i hold my finger on it, it shoots full auto.

also, my trigger rod measures 1 + 1/4 inches from the back of the rod, to the tip of the rod, not 1.98". is this the problem? did i get a wrong sear with a screwed up trigger rod?

[chadthedude2]

up...anybody?

[xen_100]

from the tip of the rod to the back of the clevis should be 1.98". not just the rod itself.

[chadthedude2]

the clevis is the gold thing right? if so, i measured it,m and it comes up a bit short.also, could not having my velocity high enough cause the gun not to shoot at all? because my regulator nut was not in very far this whole time i had the problem stupid stupid me

[xen_100]

the clevis is wha the rod threads into.

glad you got it figured out.

[chadthedude2]

to bad i didnt figure it out
so what the hell is wrong??? the trigger rod lenght is fine,and my valve is in perfect shape, what am i missing? this is pissing me off so bad...ok, now the gun is firing all by itself, no joke...i go to turn the velocity down whill its gassed up, and it goes off firing untill it stops for a second, goes off again, then i unscrew the tank... is there any tech people from AGD i can talk to?