lvl 10 strangeness

[joker4hire]

Running

Classic Mag
Preset tank (850)
Macro Line


If i use a carrier with 1 dot only and 2 shims, it doesn't shoot... even if I crank it up till the bank of the valve starts to leak.

Using a carrier with 1 dot and a line around the carrier and 2 shims, it shoots well, but there is a small leak at the back of the valve again.

Us a carrier with 1 dot and 2 lines and 2 carriers, it leaks down the barrel until i crank it up.. the leak changes from down the barrel to the back of the valve...

Can someone please give me advise on what to do...

Thanks,

[mag hugger]

dude i had the same problem somtimes the o-ring just isnt right cuase u just cant get the right fit even with the carrier your either to big or to small. so try a different o-ring and start all over agian. i found the right fit on my last o-ring and its workin perfect i hope that helped

[Koosh]

Re: lvl 10 strangeness

Originally posted by joker4hire
Running

Classic Mag
Preset tank (850)
Macro Line


If i use a carrier with 1 dot only and 2 shims, it doesn't shoot... even if I crank it up till the bank of the valve starts to leak.

Using a carrier with 1 dot and a line around the carrier and 2 shims, it shoots well, but there is a small leak at the back of the valve again.

Us a carrier with 1 dot and 2 lines and 2 carriers, it leaks down the barrel until i crank it up.. the leak changes from down the barrel to the back of the valve...

Can someone please give me advise on what to do...

Thanks,

Make sure you use the Same o-ring in all these processes...

With that said, you should know, 1 line= 1, one dot =.5... so if it has 1 dot and 1 line, it is a 1.5 carrier... 3 lines is the 3 carrier, etc.

It looks like the .5 was too tight that it wouldn't fire, and the 1.5 was just a little loose that it leaked, and the 2.5 was way too loose, thats why it leaked down the barrel... so try the 1.0 carrier (1 line, no dots) and see how that works.