I can't tell if the tone changes. I put in a smaller spring on it. it fires fine for awhile but then it seems like when i short stroke it it starts to hiss and leak out all the air. what should i do?
-
-
automag leaks
is it possible to have a leak just by short stroking my dye trigger? if the original trigger better than the dye? the leak is coming from the front of the bolt or valve and I have the level 10 on it can someone help me please. -
after short stroking it and it leaks, does the leak go away if you pull the trigger again? it may be a leak caused by the short stroke.
also, do you have any shims in the LX setup?
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
yes it sometimes goes away when i pull the trigger after the leak. I also have shims in. thanks for the helpComment
-
try taking the shims out and see if that helps. that will allow it to vent a little later in the stroke.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
Comment