Hi, have a problem here that I couldn't find in other threads, any help would be appreciated. Buddy brought over his mag w/ lvl10 for me to toss into a retro valve. it fires fine, doesnt leak, pinches etc... with either the middle spring and a higher velocity or normal and the regular sized spring... but when i start firing faster, and by that im thinking 4-5bps it will skip shots and reset the bolt, pop pop pop pop hiss pop pop hiss pop etc...
now this is a stock trigger frame so it never shot that quickly but with a regular bolt setup the retro is noticably reactive and kicks back against your finger , with lvl 10 in it doesn't do that it seems... I've got the
1.5
2-3 shims, doesnt seem to matter that much
dunno input pressure but 7-850, ive adjusted a lot with no effect on this, it will always reset itself at a higher bps.
now... heres a thought, does the lvl10 require a different trigger rod length at all? maybe needs a little extra to seal that on/off?? cause its normally the full pull on this frame. The reason that pops to mind is that this doesn't change wether I have a larger carrier, diff amount of shims, diff bolt spring/pressure, etc... its like im short stroking it constantly or something, but the lack of trigger kick back on the retro makes me suspicious.
now this is a stock trigger frame so it never shot that quickly but with a regular bolt setup the retro is noticably reactive and kicks back against your finger , with lvl 10 in it doesn't do that it seems... I've got the
1.5
2-3 shims, doesnt seem to matter that much
dunno input pressure but 7-850, ive adjusted a lot with no effect on this, it will always reset itself at a higher bps.
now... heres a thought, does the lvl10 require a different trigger rod length at all? maybe needs a little extra to seal that on/off?? cause its normally the full pull on this frame. The reason that pops to mind is that this doesn't change wether I have a larger carrier, diff amount of shims, diff bolt spring/pressure, etc... its like im short stroking it constantly or something, but the lack of trigger kick back on the retro makes me suspicious.
Comment