ACE problem - it just isn't working

[Dragoon]

Hello all. I have a problem and am hoping someone can help me.

My SFL that I just had ACE installed arrived back and was working great. But after only one day of play I decided to change the magnet configuration I had for the trigger return. Since then my ACE does not work. It fires fine when the ACE is turned off. But when it's turned on, it doesn't fire weather or not there is a ball in the breach.

Any ideas about what I can do to fix it?

Keep in mind that I do not have any electronic equipment such as a voltmeter, soldering iron etc.

Douglas

[BlackVCG]

Unscrew the sensitivity adjustment screw all the way. This should make as least sensitive as possible. Now, turn on the ACE and try to get it to shoot. It should shoot and now you just need to keep turning it in until it stops shooting.

You should also make sure that you didn't bump anything on the board when you had the gun apart and that none of the wires are pinched or came desoldered.

[Eric_AGD]

Did you add magnets? If so, how many are in there?
Do you have a spacer under the magnets?

[Dragoon]

One magnet with a spacer.

I'll try to play with the sensitvity setting.

Douglas