Few I-Frame Q's

[CoFFeY[NiTrO]]

I want one for Christmas and incase I do end up getting one

*I was wondering if they are hard to hook up on a 9v rev.?


*Is there anything (wires?) sticking outside of the gun when it is hooked up?


*Can you take your rev off (after the I-Frame is hooked up) w/out disconnecting anything?

[2000Sabre]

Answers to your questions:

The I-Frame is not difficult to hook up to a Revy. There's a detailed thread put together by AGD complete with pictures on how to do this.

Yes there are wires that stick out of the frame when your done. You can avoid the wires by using a phone plug and mounting inside the I-Frame and drilling/cutting a hole in the grip to expose the phone plug. Search the forum for various threads on setting up and intellifeed for a warp or revy. These will list the parts you need to do the job.

You would have to unplug the wires between the I-Frame and the Revy to remove it. If you use the AGD method you would have a wire hanging out the top of the frame. If you use the phone plug you shouldn't have anything.

Sorry I didn't list the links, I didn't have the time to find them for you.

[CoFFeY[NiTrO]]

No problem. Thank you for the answers.

My friend's uncle had an I-Frame on his RT and there weren't any wires hooked up but the Richochet loader moved every time I pulled the trigger.
Was it not hooked up?
Did he do the telephone thing?

[FooTemps]

You can't really internally wire a mag because it's already pretty cramped. It probably wasn't wired.

[CoFFeY[NiTrO]]

Then does the Richochet spin every time you shoot automaticly?


mIRC :
/me is confused

[FooTemps]

Originally posted by CoFFeY[NiTrO]
Then does the Richochet spin every time you shoot automaticly?


mIRC :
/me is confused

It was probably the sensor inside the feed neck of the ricoccet that made the paddle turn.

[PyRo]

Having the richocet hooked up to the rev is kind of a waste. What the richocet does is every time a ball passes the sensor it spins, preventing a would be gap. The rev only spins after a gap is sensed, fixing an existing gap. What the intelliframe sort of does, is turn the rev into a richocet. If you are getting the intelliframe don't go spend $100 on a hopper. Unless you get a halo

[Restola]

someday someone will come up with a wireless button. until then....

i think it could look better (and in fact i adjusted it alot and moved it to the other side of the frame) but it gets a LOT of attention from people (got a lot of positive questions and comments about the i-frame and the intellifeed first day i brought it out)