My level-X problem continues....

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zippy
    --------------------------
    • Mar 2003
    • 198
    #1

    My level-X problem continues....

    Ok so i almost have everything worked out. I have read the Official Level Ten Guide so i have a better idea of whats going on.

    I have my gun Set up with 850psi going in
    One striped Carrier
    two shims

    The gun shoots fine and the bolt returns fine, however there is air leaking from the bolt constantly. Any of the other carriers do not work because they are either too tight or way too loose. Can someone help me please?

    It's not a shim problem, well, i dont think it's a shim problem because the bolt is returning fine and it is venting fine.

    One more question, or statement that you can either agree or disagree to: The more shims the longer the bolt will be able to vent. So by reducing the amount of shims i will shorten the amount of time that the bolt will vent. Is this statement correct?

    Thank you for your time.

    "If if you believe in Psychokinetics, then raise my hand"
    "There are three kinds of people, those who can count, and those who can't"
    "We have enough youth, how about a fountain of smart"
    "What happens if you get scared half to death twice"
    "If we aren't supposed to eat animls, why are they made of meat?"
    "Ask me about my vow of silence"
    "I like you, but i wouldn't want to see you working with sub-atomic particals"
    Tags: None
    • xen_100
      super-uber spyder tech
      • Oct 2002
      • 1203
      #2
      take the shims out. the shims push the carrier back in the powertube. it is most likely pushed the carrier o-ring back far enough that the vent hole on the powerpiston is partially exposed. causing a leak.

      if you dont need shims, dont use them.

      "super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
      Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
      Xen's paintball pages

        Comment

        • zippy
          --------------------------
          • Mar 2003
          • 198
          #3
          Thank you once again for helping me out. I took one of the shims out and it no longer leaks, so i will go with that setup for now, thanks.

          "If if you believe in Psychokinetics, then raise my hand"
          "There are three kinds of people, those who can count, and those who can't"
          "We have enough youth, how about a fountain of smart"
          "What happens if you get scared half to death twice"
          "If we aren't supposed to eat animls, why are they made of meat?"
          "Ask me about my vow of silence"
          "I like you, but i wouldn't want to see you working with sub-atomic particals"

            Comment

            Previous template Next
            Working...