Omen theory of operation

[la690]

could anyone try to explain to me how this gun works? or point me in the right direction? thanks.
(dont worry, i did a search)

[SpecialBlend2786]

i've been wondering about that too. I cant find anything about it though.

[iLLfLiP69]

basically its a closed bolt 2 hamer design blowback, with a sear tripping trigger. The gun itself is not electro-pneumatic, but has an electronic trigger. When the trigger is pulled, one piece of the hammer (connected with the back block) moves apart from the other piece, which is a unique design. Hence the unique closed bolt blowback design...
hope this helps

[SpecialBlend2786]

what about the cam feed? what does that do? Thanks

[iLLfLiP69]

The cam feed arm is 2 strips of rubber(as long as mag wire detents, or a lil' longer) that act to lightly slap or put a ball into the breech. The cam device is slightly off center, so that a ball from a fast loader is always resting there comfortably. When the gun fires, the bolt goes back and this action makes the rubber arm slap another ball into the breech. It acts similar to an intellifeed warpfeed because will only feed a ball when the trigger is pulled. But, it will only feed a ball if it is fully in the chamber outside of the breech. So you simply don't get the ball chops from other guns when a ball is half way in the breech, hence the cam feed anti-chop system. Most other markers accomplish this with eyes, the cam feed does it mechanically, and very good might i add.

P.S. Soon to be a proud owner of an Omen...

[SpecialBlend2786]

nice. Thanks for the info.........now i want one