max flow and lvl 10!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • DJBacon06
    Aww DIP!
    • Nov 2002
    • 733
    #1

    max flow and lvl 10!

    ok so here's the deal....i just got a max flow today....and for some reason, it doesn't work well with my lvl 10!!....im shooting at around 600 psi and the lvl 10 isn't as sensitive any more...and now after playing around with it for a while, it leaks out of the fill nipple

    any help would be great!!
    Hit me up on the IM: DJBacon06
    Tags: None
    • DJBacon06
      Aww DIP!
      • Nov 2002
      • 733
      #2
      ok, so i was told i might need a new spring on it....do you think that might help??


      please people!
      Hit me up on the IM: DJBacon06

        Comment

        • TheDuelist
          Office use only.
          • Oct 2002
          • 671
          #3
          What is your setup. I run a max flow on my Emag at around 850 input with out any problems. Give us some more info so we can help you diagnose your problem.

            Comment

            • DJBacon06
              Aww DIP!
              • Nov 2002
              • 733
              #4
              well like i said, i think i need a new spring on the max flow.....the previous gun was a matrix....but, its a 68/45 max flow...ummmm, the input pressure was set around 700 psi. and i know why the nipple was leaking. so i guess i will replace the spring and find out if that works


              thanks
              Hit me up on the IM: DJBacon06

                Comment

                • TheDuelist
                  Office use only.
                  • Oct 2002
                  • 671
                  #5
                  Proper setup for the matrix would have been a low pressure (shocker) body and the low pressure piston. If you have that setup then you will have problems getting enough input pressure to run the mag properly. The reg bodies on the max flow are marked on the bottom either 4500 or shocker. The one marked 4500 is what you need with the high pressure piston and the high pressure spring. Check your setup to make sure it is right for what you have. I switched from a matrix to an Emag and had to do the same thats how I know what your going through. Hope this helps.

                    Comment

                    • Z-man
                      You guys lost me
                      • Jul 2001
                      • 2202
                      #6
                      Very true. I don't know if you are using the newer MaxFlows (with the tiny on/off leaver) but on mine, I run the RT at no less that 620ish psi and most of the time at 850+ because I like it very pingy. The new ones ship with 2 springs (High pressure 300-1000psi and low pressure 0-250psi). I know nothing of changing valveing but that might help.


                      Leech MY Images Will You?!?!

                        Comment

                        • DJBacon06
                          Aww DIP!
                          • Nov 2002
                          • 733
                          #7
                          ok, sorry i haven't been replying.i just back from vacation....anyways......

                          the max flow is marked "4500" and it is the new style, but i got it used from a local shop......i am gonna go up today or tomarrow, and see if i can sort things out.
                          --as far as i know...this SHOULD help....i hope

                          thanks
                          Last edited by DJBacon06; 07-19-2003, 02:40 PM.
                          Hit me up on the IM: DJBacon06

                            Comment

                            Previous template Next
                            Working...