RTnot shooting with barrel / no trigger reaction

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bones
    Registered User
    • Jul 2002
    • 6
    #1

    RTnot shooting with barrel / no trigger reaction

    I have two automags and both seem to have a little problem. First mag RT..I am assuming its a base line automag RT except for the macroline. It has an outstanding rate of fire as long as the barrel is not installed. As soon as the barrel is inserted, the mag has complete shootdown and does not recharge. I thought this was pretty weird considering that it shoots great with out the barrel in it.
    2nd mag..Again its a mag RT with some mods.(warp feed, intellifeed for warp, LX bolt) It shoots great one shot at a time, but it does not have the "bounce" of the trigger as my other mag has(without barrel of course). I didn't want to put the old bolt system hoping it wasn't the LX. Any input would be greatly appreciated.

    thanks
    spraying paint
    Tags: None
    • Schnitzel
      'Saurus'
      • May 2002
      • 754
      #2
      does the first mag have an lx kit in it? if it does, it seems to be having the same problem as my brother's. the barrel he's using is slightly off-centered, and we've narrowed it down to the fact that his LX bolt is stopping due to friction created with contact between the bolt/barrel. i put his stock internals back in....and it shhots fine with no problems. i'm still trying to find a resolution.

      BEST DEALER: RogueFactor

        Comment

        • bones
          Registered User
          • Jul 2002
          • 6
          #3
          the first mag does not have a LX and it does not shoot with the stock barrel or any barrel for that matter.
          spraying paint

            Comment

            • athomas
              Of course it works-its AGD
              • Jan 2002
              • 8039
              #4
              Are the mags RT pro's or original Automag RT's?

              The trigger bounce could be the differemce in the air tanks. Are you using the same tank when trying both guns?

              Also, The on/off pins may be a slightly different length which could affect reactivity. If there are differences in the trigger frames, that could contribute as well.

              On the subject of the first RT not firing with the barrel on. Is it the stock barrel you are using? Maybe the twist lock is bent or out of adjustment causing the barrel to sit off centered. Some aftermarket barrels are known to have manufacturing problems that cause the barrels to not line up properly. sometimes it is as simple as putting a wrap of tape under the barrel o-rings.

              It doesn't take much of a misalignment to cause the level 10 to not fire. The solution is usually simple.
              Except for the Automag in front, its usually the man behind the equipment that counts.

                Comment

                • bones
                  Registered User
                  • Jul 2002
                  • 6
                  #5
                  They are both RT pro's.

                  For the 1st mag(not shooting with barrel), i have tried the stock barrel and a boomstick and they both don't work. As soon as i take the barrel out, i could rip on it all day. There is no LX in this mag.

                  I am using the same tank for both mags, but the mag that does not respond like an RT (2nd mag),even though the bolt says RT, and it has done it in the past, has an intelliframe grip on it. Its weird, it just all of a sudden stopped being reactive. I have no problem with the LX in this mag.

                  shawn
                  spraying paint

                    Comment

                    Previous template Next
                    Working...