Addition of an ACE to an emag?

[RSM]

Can an ACE be installed into an emag with a ule rail with some machining?
Anybody tryed or done it yet. i hear they plug into the burst mode plug on the board. does the board need to be reprogrammed to use it?
thanks

[cheetah256]

nope. as far as i've heard, the ace only works on mags with modular bodies, such as xmags and sfl's.

[ignatz]

Technically, yes you can connect the AGD ACE to the EMAG, however you would have to a> Mill the rail, body and gripframe so the ACE would fit and b> re-program the EMag board with new firmware so that it acutally uses the ACE. This is the hardest part IMHO, since you would either have to write your own software or get the AGD hex files... either way, you're going to lose your burst mode on the EMag.

The question is, if you have LX why add extra superfluous bits to your marker?

[Gadget]

AGD Europe sell an E-Mag to Xtreme (X-Mag) body upgrade - it replaces your rail + body and adds the ACE - they also upgrade the firmware to include the ACE software.

Details here: http://store.securehosting.com/store...hp?itemcode=10

It's not cheap though - if you've got level 10 you probably don't need it.