E-mag won't fire - HELP!

[boggerman]

When I gassed up the marker, there was no tell tale click like there should be. The solonoid actuates but nothing happens, I disassembled the valve and cleaned and oiled everything(not the reg) and all o-rings appeared fine. Any ideas???

[Koosh]

Manual mode not work either?

We still got 5 days before AO CO, so plenty of time

Edit: or if the solenoid isn't working, the battery is charged, right?

[ShooterJM]

No tell tale click? Like the valve isn't pressurizing? Is your tank output turned down maybe?

[boggerman]

Tank has ~2000 psi, and the battery is charged. The solonoid does ckick, just no shooting occurs. I maxxed out the velocity adjuster and still nothing. It did this once before and I disassembled and cleand everything, and it seemed like the sear was dragging. Cleaning and lubing seemed to fix it, but now it is doing it again. Also, manual mode does not work-but it hasn't worked since I installed the lvl10 either.

[Koosh]

Originally posted by TheFlamingKoosh
Manual mode not work either?

*cough*

Just trying to see if its a Vlave problem or a Electronics problem...