Intellifeed an Eblade, help a back player out!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zabbu
    Bunkermonkey Hunter
    • Mar 2003
    • 94
    #1

    Intellifeed an Eblade, help a back player out!

    i know its a mag forum, but i was hoping some of you deep thinkers could help me out.
    I want to run a warpfeed with my eblade cocker, but i want it Intellifed. Any intelligent ideas here? There is no port for the intellifeed, or even any obvious area to solder one into.
    thanks
    brandon
    Proud owner of a 98 Eclipse cocker with Eblade, and soon to be warped!
    If you get bored AIM ME!
    zabbux
    Tags: None
    • GoatBoy
      Junior Mint
      • Jun 2003
      • 1399
      #2
      Re: Intellifeed an Eblade, help a back player out!

      Originally posted by zabbu
      i know its a mag forum, but i was hoping some of you deep thinkers could help me out.
      I want to run a warpfeed with my eblade cocker, but i want it Intellifed. Any intelligent ideas here? There is no port for the intellifeed, or even any obvious area to solder one into.
      thanks
      brandon
      The most ghetto external way would be to slap a micro switch to the back of the gun, so when the back block goes back, it hits the switch. Poof, done. Beavertail is a convenient mounting point.

      I did this a LONG time ago with my cocker for giggles.
      "Accuracy by aiming."


      Definitely not on the A-Team.

        Comment

        • 314159
          Registered User
          • Nov 2001
          • 555
          #3
          i have heard a couple people with e spyders attach bolth leads of the intellifeed jack to either side of the solenoid. you got a 50/50 chance of getting the polarity you want that will make the warp work, picking the wrong polarity will not dammage the gun or warp.


          if you want a clean 5v signal to the warp, you can hook up a ziner diode and resistor in series across the solenoid. and hook the wires from the warp plug across the diode.

          (+voltage of solenoid)------/\1k/\/----T--|<|---T-----(- voltage of solenoid)

          you can follow one of the - or + voltages of the solenoid back to the battery connectors. again, connect the warp plug wires at the T's, again picking the right polarity is 50/50, picking wrong one won't do anything.
          As society and the problems that face it become more and more complex and machines become more and more intelligent, people will let machines make more of their decisions for them, simply because machine-made decisions will bring better results than man-made ones. Eventually a stage may be reached at which the decisions necessary to keep the system running will be so complex that human beings will be incapable of making them intelligently. At that stage the machines will be in effective control. People won't be able to just turn the machines off, because they will be so dependent on them that turning them off would amount to suicide

          sometimes I just freaking hate people. which means the next day I will love them for the sake of balance, but right now I will just concentrate on the hating. Hate hate hate. Blaaaarg! ;)

          turborev - with ai like this, if it controlled any more than a paddle, it would kill you and everyone you care about. ;)

            Comment

            Previous template Next
            Working...