Leak Problem, any help appreciated...

[GSKRAP]

Hey guys... my mag is leaking, it leaks when i pull the trigger in a little bit, but not all the way. im almost 100% sure its coming out the barrel. i replaced both powertube o-rings and and the on/off o-rings since it leaks when the trigger is about half-way pulled. the leak is still present. i watched the whole tech video twice but im lost here. if someone knows whats wrong, let me know.

Thanks

[Spray Painter]

you may try putting oil in the ASA and shoot it, i had a problem like that and the oil solved it.

P.S. this should be in the tech forum

[GSKRAP]

any other suggestions?

[IcantBelieveit]

take it to the tech forum

[QUINCYMASSGUY]

If you have a level 10, take out one shim and see what happens. I had the same issue where pressing the trigger a little let air start venting without releasing the bolt.... oh yeah, and take it to the tech forum! You should know that by now

[GSKRAP]

i dont have lvl 10, if any mod reads this, move it to tech... any other suggestions for me?

[cphilip]

Sounds like prefire leak. Its your PT spacer.

Moving to tech.

[GSKRAP]

how can i adjust my PT spacer though?

[GSKRAP]

up
upu
upup
upupu
upupup
up
up
up
up
up
up

[ratmonkey]

with a power tube spacer kit. what size is the one thats in it now?

[GSKRAP]

ummm... its stock, ill have to take it apart later and look. does it have to be bigger or smaller or what?