E-Mag Field Strip Screw

[l33tpaintballer]

For some reason my field strip thumb screw that holds my valve in won't go back in. Is there any reason for this? I took it out and now I can't get it back

Any help would be appreciated, thanks.

[BlackVCG]

Make sure you have the regulator body fully tightened by hand before you put it in the mainbody. Slide the valve in and put the screw in and wiggle the valve around while trying to thread in the screw and it will go in.

[l33tpaintballer]

By regulator mainbody you mean the part that says EMag on it right? I'm trying to push it to the left (towards the barrel) and it goes all the way. Then I try and wiggle it around while I screw it in but I can't get it. Hmm....

How would I go about disconnecting the regulator? I try and pull it out but I can't.

[FreakBaller12]

there's a groove there for the valve to slide in and lcok kidna like the barrel twist lock

[l33tpaintballer]

Regulator main body? Huh?? I need some more explanation here because I'm trying to twist it and stuff like I do the barrel and its just not flying. Is there anywhere I can see schematics so I know what you guys are talking about?

Thats the biggest downside for me moving to a mag, I don't know anything about em

[Woogie12]

My friend had that same problem. We could get the screw in but it wouldn't screw in. Just keep wiggling it until you find the spot.