I have a Micro E-mag that doesnt work in mechanical mode. Someone told me that the trigger rod may be too short and this sounded like it may be true so i tried to lenghten the rod but i couldnt get to it to try to make it longer. I managed to get the little ring on the plunger in the right spot and lift the plunger out but then it got stuck on the next little ridge and i still couldnt get to the rod. If you may know of another reason that it may not work in M mode, it would help a lot. Thanks.
-
-
You need to pull the E-Clip off of the solenoid plunger (black piece) and then lift up on the back of the sear and pull the sear assembly out.
To see if it's too short, pull the trigger in E-Mode and hold it back with the gun gassed up and the battery off. Now look at where the trigger rod is in relation to the back of the trigger. You want it set so there's just a small gap inbetween the trigger rod and the back of the trigger when the trigger is pulled in E-Mode.
That should get your M-Mode working, if not, we'll try other things. -
thanks for now, black. ill try it as soon as i get air then ill let you know.Comment
Comment