trigger problems with level 10

[t2theko]

I installed my level 10 (or got half way through it) but when I gased up to test the carried seal, I had a leak through the barrel, but more importantly, the trigger would not set into position to fire, it just hung limply, what do I do?

[TAW]

Did you turn up your velocity?

[t2theko]

I believe so, the velocity adjustment is the screw that must be removed to access the bolt correct? I have tried that in every possible position

[jpm]

The velocity adjustment screw is the 1/8th inch allen keyed hole in the very back of your A.I.R. Valve. That is assuming you are using the Classic Valve. However the position and size are no differant, to my knowledge, on any of the other valves (ie. RT, Retro, X). The only screw you have to remove to get to your bolt is the Field Strip screw.

[Woogie12]

Yea, you have to turn up the velocity. It's on the back of the gun.

[BlackVCG]

No need for two threads for the same problem.