when i gas up my gun the sear does not extend forward to push the trigger up so it can shoot. it stays back and makes the lawn sprinker sound. i dont have the manual or video so i need some quick answers. i know AGD gives them out for free i just havent gotten a chance to get it. i have a buncha parts kits so fixing it isnt a problem. it also leaks out the back of the where the allen wrench hole is for the velocity. also i just changed the powertube o-ring and it didnt change anyting. thanks in advance
-
-
First make sure that you have it well-lubed. Second, make sure you gas the gun up quickly. If that doesnt work, try a different size powertube spacer. Oh, and as for air leaking out the back, that usually means your velocity is set too high. Dial it down a bit, and the pressure release valve should stop venting.-Gig 'Em Ags! -
The lawn sprinkler is the on/off valve. you probably need a new tephlon o-ring in it.Comment
-
alright, i fixed the leak and the sear comes ofrward now but still leaks sometimes out the back of the valve any suggestions??Comment
-
Back out the velocity adjuster one turn and fire it a few times and it should stop leaking.Comment
-
i tried that and it stopped then after about a minute it started leaking again then i fired it and it stopped and so on.. any suggestions?Comment
-
keep moving it to the right...tighten it until the leaking stops
i hope ur using nitrogen...cause mags dont like c02
Comment
-
yes im using nitro cuz i have to, i have retro.Comment
Comment