i normally from a nitro tank but its leaking so i put a bottom line on it and screwed in my co2 bottle and i noticed the trigger was very stiff for the first shot. after i let it sit 15-20 seconds air started to leak out of the gun where the automag symbols line up. i fired a couple of shots and it stopped but after a few seconds the leak started back up again. whats wrong with it?
-
-
Perhaps you froze a seal with liquid co2. Try oiling everything up real good, might help.-Gig 'Em Ags! -
Could be a problem with your regulator seat and/or the large regulator body o-ring (the two orings that you see when you unscrew the regulator from the valve. I'd check those for damage first.
-BCSpyder BC
------------------------
Polished Minimag HR Lvl 10
ReTro Valve
Intelliframe w/ blade
SP Blue Splash Kit
12" SS Lapco Bigshot
SP Blue Splash AA 12"
KAPP D/F and gas-thru grip
SP Wood Grips - natural
Pure Energy 3k 68ci
12v Revvy
Spectra Gogs
------------------------Comment
-
also you could have your velocity a bit high. if you put co2 on instead of nitro you have to rechrony your gun.MicroMag Phase 1
S/N GFX001489
AutoResponce frame
double trigger shoe (until i can make a ring shoe)
PTP warp feed
And the Biggest, Heaviest, 19+bps'ist Tippmann you have ever seen.
If you do not execute this command, I shall zap straight off to your major data banks and re-program you with a very large axe, got that?
There must have been a time
when we could have said no.Comment
Comment