Parts list for a regular Mag....

[whilhelm20]

Ok, I'm going to build a mag within the next month or so, and i have a classic valve, a barrel, a body, and maybe a frame lined up. What other parts do i need to make this a complete and operable mag. And if you can't get them off AGD's website, please post where i can.


Thanx

[Woogie12]

You also need a rail, a field strip pin, and an asa if you want to use a foregrip.

[whilhelm20]

that all??? what else?? i need a complete list i can use to buy the stuff to complete it

[Woogie12]

I think that's it except for a drop or bottomline and tank. Oh yea a powerfeed plug too. And a bolt if the valve you are getting doesn't come with one.

[Woogie12]

Here are the parts. http://store.airgun.com/acb/showprod...ectGroup_ID=11 and http://store.airgun.com/acb/showprod...jectGroup_ID=8

[whilhelm20]

awesome gonna check those links out, thanx dude

[whilhelm20]

ugh, so i gotta get all that stuff from the first link???

[Woogie12]

Well.....not necessarily. Does the classic valve you are getting come with the bolt, on/off, and valve?

[whilhelm20]

ahh ****...this "simple" gun keeps getting more and more complicated..ugh

[Woogie12]

Do they come with those things I listed?

[whilhelm20]

if they don't....what do i need? I'm kinda sure he's gonna keep bolt, and on/off but i'm buying the classic valve from him...

[whilhelm20]

oh wow, this project is definately gonna be a ton of searching and reading...ahh crap...just when i think i've got it all simple and stuff...it just keeps getting harder and more complicated

[Woogie12]

I would assume he would sell it with the bolt and on/off. But if he doesn't you need to get the amm/mm on/off assembly, a bolt, bolt spring, bumper, power tube tip and all the o-rings for the power tube. If i were you I would straight up go for the Level 10 bolt kit to elminate chopping and all you would have to get extra would be the on/off assembly.

[whilhelm20]

I wasn't planning on getting lvl 10 but that was because i was planning on getting the valve and barrell with body for more then i am. Ok, what other parts do i need?

I've got--
classic valve w/out bolt & on/off
classic body--regular feed with barrel

What do i need?
on/off assembly
bolt -------prolly going to get lvl 10

[Woogie12]

Originally posted by whilhelm20
I wasn't planning on getting lvl 10 but that was because i was planning on getting the valve and barrell with body for more then i am. Ok, what other parts do i need?

I've got--
classic valve w/out bolt & on/off
classic body--regular feed with barrel

What do i need?
on/off assembly
bolt -------prolly going to get lvl 10

That's what you need. The level 10 kit comes with everything else you need. But don't forget the ASA with a foregrip and the trigger frame with the field strip pin. Oh yea, and a rail too.