Questions about the rt pro..

[shok]

Hey I got a few questions about the automag rt pro...


1 : Is a high pressure absolutely needed for it to run (will it even work at say a 400 psi low output preset tank?)

2 : Trigger bounce in tourneys are illegal, right? So if I lowered the psi enough to lose the bounce, how fast could you get it shooting?

3 : Stock will the gun chop alot?

4 : How accurate is the stock barrel?

I'm really lookin into trading one for my cocker I just wanna know these questions about it first.

[Kevmaster]

you need 500-550 or so to operate the marker. 650 input is recommended. The reactivity increases with more input pressure

NPPL and PSP rules do not disallow reactive triggers. However, 'runaway' triggers are disallowed. 'runaway' is when you hold the trigger and it bounces back off your finger and fires indefinitely. However, local tourny rules may vary although usually are based off NPPL/PSP rules

the NEW stock RT Pro will come with a Level 10 bolt kit, which when installed properly, will almost NEVER chop

the stock barrel is fine in accuracy. Its going to be just about as accurate as any other barrel out there

[shok]

Also, how many shots should I get using an aci bulldog 68/3000 750 psi output tank?

[abaez]

I've got a 68/3000 crossfire and I get between 700-1000 shots till it gets down to 600 psi and I have to refill. It will not work under 600 psi.

[shok]

Ok cool, I was lookin to get one of those tanks or the bulldog. Thanks for your help everyone!

[Kevmaster]

the general rule is 10x ci's for a 3k tank. so roughly 680 shots per tank.

I get around 1200 out of my 68-45 so I would say 700 out of your 3k is about right...and right on the rule...