ULE Trigger problem

[Blurry]

i am using all four shims that were included in my kit every time i added a shim the pull and shoot down were getting better now im out of shims using all four of them does agd have any for people to buy or shouldnt they be included in the assembly price i dont know need some assistance please help

[Dayspring]

You can use 1 Level 10 Shim to substitute for 2 ULT shims.

[Blurry]

dont have level 10

dont have level 10 any other suggestions

[Tunaman]

call AGD for more shims.

[f3rr3+]

I may be wrong but i thought you needed lvl 10 to have the ULT... if im wrong just completely disregard this post

[personman]

Originally posted by f3rr3+
I may be wrong but i thought you needed lvl 10 to have the ULT... if im wrong just completely disregard this post

Thats what I thought too

[Blurry]

dont think so

that really wouldnt make any sense

[BlackVCG]

It should have had two shims already installed and 3 extras in the kit.

[Dayspring]

Re: dont think so

Yes. You SHOULD have the Level 10.

Originally posted by Blurry
that really wouldnt make any sense

[Blurry]

tell me why the level 10 would effect the ule trigger

i dont see why the level 10 would effect the ule trigger explain proof of any sort not just here say and factual opinion?

[FutureMagOwner]

yes you need level 10 because it requires the lighter bolt.

[athomas]

The level 10 moves alot of the pressure from the sear but increases the pressure to the on/off pin. The ULT then reduces the pressure on the on/off pin.

By using the ULT with the level 7, you would reduce the pressure of the on/off pin, but the sear pressure would still be a considerable force. Thus, the ULT would not cause a significant reduction in overall trigger pull force.

So, yes you should have the level 10 if you want to get the real benefit from the ULT, but it will still work with the level 7.

[Blurry]

thank you

the trigger is great now i did some lets say jerry rigging to the shims fabricated a few of my own spacers and such thanks for the in put fellas