Automag RT Classic Questions

[tapdata55]

Does anyone know if I can replace the gas thru grip on the classic rt and if you can can you put a regulator?

Also do they make a ule body or any no rise body for the classic rt?

Thanks for the help.

[Dayspring]

No, you don't want another regulator on the gun. The valve has one already and the tank is #2. Any more and you start getting flow problems and shootdown.

No, you cannot put a no-rise or ULE body for the classic RT.

[cheetah256]

exactly. you *could* put a regulator on, but theres a very good chance you'd start having shoot down issues. you should be able to put a standard gas through grip on it though.i don't have my RT sitting here to check, but theres most likely a small hole in the rail that you can punch through. you just mount your vertical asa in that hole, and screw yor grip in.

[tapdata55]

thanks

thanks for the help. I was thinking the exact same thing about putting a standard gas thru grip, but just wasnt sure if there was a hole in the rail. Ill check that out. As for the body, I might have found someone who can modify the powerfeed on the body to make it into a no-rise or low-rise body.

[Outbreak]

ClassicRT gas-thru

A pic of my ClassicRT with asa/gas-thru setup...remove the stock foregrip and tap the hole.

[Z-man]

I cut off my powerfeeed on my Classic RT and made a warp feed out of it. Very sexy!

[tapdata55]

Re: ClassicRT gas-thru

Originally posted by Outbreak
A pic of my ClassicRT with asa/gas-thru setup...remove the stock foregrip and tap the hole.

very nice is there a hole to tap already or do I need to drill the whole into rail by eye?

Very nice mag Z-man. Maybe ill see you sometime at the Santa Clara fields