leaking out the barrel

[blackjack]

ive had a problem the last few days that i cant seem to fix... i have the retro valve with the level 10 bolt and i seem to be haveing air leaking straight thru the gun. i have treid replaceing all the o rings in the valve and changing the different size of the carrier but it appears to make no difference. when i pull the trigger the air will stop, but then when i let it go again it continues to go thru the gun. it is a loud hiss coming out the barrel and it starts the second i turn the gun on... plz help. thanks

[athomas]

First, remove any shims you have in the level 10 setup.

Check the carrier and o-ring combination on the bolt stem with the bolt out of the gun. The carrier should slide over the bolt stem with a slight bit of resistence. If it is loose or hardly any resistence, it will leak. Put a bit of lubricant on the bolt stem and in around the carrier o-ring when you reassemble. Make sure you aren't missing the little black o-ring around the outside of the carrier. Gas the gun up. If it still leaks, try a different o-ring and do it again.

Is the sear worn at all? If the sear is worn, replace it. It probably isn't this but check anyway.

Let us know how you made out.

[FreakBaller12]

make sure everything is well oiled
don't go nuts but make sure each o-rign is lubricated

mags love oil