I just gassed it up today and it had a terribly LOUD and LARGE leak I think coming from the bolt ; I put my hand in front of the gun where the barrel would go and air was hissing out of there and the feed tube. PLEASE HELP!!
-
-
Well do you have LX? If so it could be as simple as changing the carrier. If not, then its most likely the power tube o-ring. Unscrew the power tube tip, and you'll see it.Sadly the mag is gone, moved on to an LCD Trix
Originally posted by Nachos
I don't care if you need a special plastic that comes from a tribe in the amazons that can only be crafted by Willy Wonkas Oompa Loompas in his chocolate factory. -
Another thing to try is gassing it up real quick. You might now be getting a quick enough burst of air to seal all the O-rings. Also you could try pushing back on the bolt with a squegee when you gas it up.LX RT-Pro, No Rise, 16 Inch Boomy, 12v Revvy, 68/3k Flatline
Black E-Max, Pewter ULE, Halo TE, Worr Gas
My Feedback thread
http://www.automags.org/forums/showthread.php?s=&threadid=80561Comment
-
Yeah I took apart the power tube and all taht oiled it all up, still leaks horribly, would a new oring kit work, and can I sent it to agd even though I have no stars on my rt valve?Comment
Comment